A Guide to Mold Inspection


It is not uncommon to find mold growing in your vicinity. Given the sufficient conditions to promote mold growth, mold cannot fail to develop and multiply rapidly. A small growth of molds can be easily be dealt with although large growing of mold needed to be inspected by a qualified professional and treated to prevent any potential health risks involved. The professional should initially determine the type of mold growing and the treatment that needs to be administered for effective eradication. There are several professionals mold inspectors, though it is always advisable to get the best mold inspector you can comfortably afford. It is obvious to note that cheaply is expensive. There is great need to get a qualified mold inspector without looking for the cheapest service. This is because mold is potentially harmful when consumed and can be fatal at times.


Mold inspection entails identification of any conditions around the area of concern that has mold growth and consequently finding out the major problem causing the mold to grow. The inspection should be done both interiorly and exteriorly to ascertain whether there are any signs of water leakage. The sources of the leaks should also be established. The inspectors start by measuring moisture levels in the area of concern. They use a special meter to gauge moisture levels at a depth of almost two feet. A lot of care must be considered in areas near water sources or heaters as it can be dangerous to the mold inspector. With the special meter, the inspector can tell whether the wall moisture reading is within the acceptable range or not. To know more, Click! 


Then you should know if the moisture levels are out of the required range and whether the samples will be taken to research about the types of mold available. Sampling should also be done on the water source especially if the water is being used. The air sample is the most likely sample to be taken considering that mold produces spores which are blown off by air. The inspector should then determine the strain of mold and the concentration of mold spores. Both interior and exterior results should be recorded. The main reason why outside concentration is determined is simply that mold spores are inhalable and high concentration of certain types of mold can be dangerous for human consumption. Proper treatment should be administered when results are out by the professional mold inspector. It is important to note that before mold inspection, the rooms to be checked must remain closed for 12 to 24 hours. To get started, click Here! 



For more info, check out http://www.ehow.com/list_5481597_things-look-home-inspection.html as well.